Requesting location access...

Something went wrong while loading pickup times.

Select pickup time


Select pickup location


    Enter your postal code

    No pickup locations near you. Try another postal code.


    Inventory by location

    Skip to content

    Fractal Design Venturi HP-12 PWM FD-FAN-VENT-HP12-PWM-BK 120mm Case Fan (Black)



    • Mfr Part Number: FD-FAN-VENT-HP12-PWM-BK
    • Features:
      • Featuring true FDB-bearings, providing silent operation coupled with a long lifespan
      • Equipped with a counter-balanced magnet that reduces the axial tension on the bearing
      • Features integrated vibration-dampening corners, made from solid high-quality synthetic rubber
      • Dense, sturdy construction, made from high grade glass fiber reinforced thermoplastic polymer
      • Fan geometry is optimized for high pressure, delivering high performance results in high restriction usage scenarios, such as in use with large dense heatsinks or water cooling radiators
      • Featuring PWM control with a very wide speed range, starting at only 400RPM (400 ± 100 RPM), ideal for CPU heatsinks or radiators, where the motherboard can control the fan speed based on the CPU temperature
      • Aerodynamically shaped thin stator struts reduce noise and unwanted turbulence
      • Strategically placed notches on the blades further reduce and diffuse any humming noise produced when the blades pass the stator struts
      • The trip wire technology introduces a micro-turbulent layer that combats elements that negatively affect performance, resulting in quieter operation
      • Comes with a PWM Y-cable, for connecting additional fans to a single PWM header on your motherboard or PWM fan controller
      • Available in 120mm fan sizes
    • Rotational Speed: 1800 RPM
    • Acoustical Noise: 31.7 dBA
    • Maximum Air Flow: 61.4 CFM / 104.3 m3/h
    • Maximum Pressure: 2.3 mm H2O
    • Actual Input Power: 1.0 W
    • Maximum Rated Input Current: 0.2 A
    • Nominal Input Voltage: 12V
    • Minimum Startup Voltage: 6V
    • Low PWM Speed:
      • Speed: 400 RPM
      • Static Pressure: 0.45 mm H2O
      • Air Flow: 15.4 CFM / 26.2 m3/h
      • Noise Level: < 10 dBA
    • Screw Hole Pattern: 105 x 105 mm
    • Connector: 4-Pin Fan Header
    • Bearing: FDB
    • Number of Blades: 7
    • MTBF: 150,000 hours
    • Cable length: 500 mm
    • Cable Type: Braided All-Black Ribbon Wire
    • Color: Black blades, black corners, dark grey ("Gunmetal") frame
    • Dimensions: 120.0 x 120.0 x 25.0 mm
    • Weight: 179.0 g
    • Package Contents:
      • Venturi Series fan
      • Screw pack with 4 metal screws
      • 1->2 PWM Signal Splitter Cable


    Sold Out